RDX AWD L4-2.3L Turbo (2010)
2. Install the parking brake lever (C) and the wave washer (D) on the pivot pin, and secure with a new U-clip (E).
-
Install the wave washer with its convex side facing out.
-
Pinch the U-clip securely to prevent the parking brake lever from coming out of the brake shoe.
3. Position the parking brake shoes (A), then hook the rod spring (B) on the strut (C) first with the spring end (D) pointing downward. Then hook the
rod spring to the parking brake shoe, and install the strut on the parking brake shoes.
4. Apply a thin coat of Molykote 44MA grease to the brake shoe ends and strut ends (A), sliding surfaces (B), and opposite edges of the parking
brake shoe (C) as shown. Wipe off any excess. Keep the grease off the brake linings.