RDX AWD L4-2.3L Turbo (2010)
6. Repeat for all rockers and both shafts. If the clearance is over the limit, replace the rocker shaft and all over-tolerance rocker arms. If any intake
rocker arm needs replacement, replace all rocker arms in that set (primary and secondary).
VTEC Rocker Arms
7. Inspect the rocker arm pistons (A). Slide them into the rocker arms. If they do not move smoothly, replace the rocker arm set.
NOTE: Apply new engine oil to the rocker arm pistons when reassembling.
8. Reassemble the rocker arm assembly See: Cylinder Head Assembly/Service and Repair/Overhaul/Rocker Arm and Shaft Disassembly/Reassembly
.
9. Install the rocker arm assembly See: Cylinder Head Assembly/Service and Repair/Overhaul/Rocker Arm Assembly Installation.