RDX AWD L4-2.3L Turbo (2010)
26. Install the oil pump See: Engine Lubrication/Oil Pump/Service and Repair/Overhaul.
27. Install the oil pan See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan Installation.
28. Install the cylinder head See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head Installation.
29. Install the drive plate See: Transmission and Drivetrain/Flex Plate/Service and Repair.
30. Install the transmission See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Installation.
31. Install the engine/transmission assembly See: Service and Repair/Engine Installation.
NOTE: When any crankshaft or connecting rod bearing is replaced, run the engine at idle speed until it reaches normal operating temperature, then
continue running it for about 15 minutes.