RDX AWD L4-2.3L Turbo (2010)
10. Coat both reamer and the valve guide with cutting oil.
11. Rotate the reamer clockwise to the full length of the valve guide bore.
12. Continue to rotate the reamer clockwise while removing it from the bore.
13. Thoroughly wash the guide in detergent and water to remove any cutting residue.
14. Check the clearances with a valve See: Service and Repair/Overhaul/Valve Inspection. Verify that a valve slides into the intake and exhaust valve
guides without sticking.
15. Inspect the valve seating. If necessary renew the valve seat using a valve seat cutter See: Service and Repair/Procedures.