RDX AWD L4-2.3L Turbo (2010)
4. Disconnect the engine wire harness connectors, and remove the wire harness clamps from the intake manifold.
-
Four injector connectors
-
Throttle body connector
-
MAP sensor connector
-
IAT sensor connector
-
Turbocharger bypass control solenoid valve connector
5. Remove the quick-connect fitting cover (A), then disconnect the fuel feed hose See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Line Coupler/Service and Repair/Fuel Line/Quick-Connect Fitting Removal.
6. Disconnect the vacuum hoses (A) and the brake booster vacuum hose (B).