RDX AWD L4-2.3L Turbo (2010)
10. If the ignition timing differs from the specification, check the cam timing. If the cam timing is OK, update the PCM if it does not have the latest
software See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/PCM Update, or
substitute a known-good PCM See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview, then recheck. If the system works properly, and the PCM was substituted, replace the original PCM See: Powertrain
Management/Computers and Control Systems/Engine Control Module/Service and Repair.
11. Disconnect the HDS and the timing light.