RDX AWD L4-2.3L Turbo (2010)
27. Remove the water bypass pipe (C) and the water bypass hose (D) from the exhaust manifold.
Installation
1. Install the water bypass pipe (A) with a new O-ring (B), then install the water bypass hose (C).
2. Install the exhaust manifold (D) with a new gasket (E) new self-locking nuts (F) and bolts (G). Tighten the bolts and nuts in a crisscross pattern in
three steps, beginning with the inner bolt.
3. Install the water bypass hoses (H).
4. Pour new engine oil into the turbocharger oil line.
5. Install the turbocharger assembly (A) with a new gasket (B).
NOTE: Use care when installing the turbocharger assembly. Do not turn the actuator rod adjusting nut, or touch the impeller.