RDX AWD L4-2.3L Turbo (2010)
Air Register: Service and Repair
Dashboard Side Vent Removal/Installation
NOTE: Take care not to scratch the dashboard or the related parts.
1. For the left side outlet: Remove the driver's switch panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Dashboard Driver's Switch Panel Removal/Installation.
For the right side outlet: Disconnect the glove box damper from the pivot on the glove box. While holding the glove box, release the glove box stop on
each side from the dashboard by pushing them in See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box
Removal/Installation.
2. Push the back of the dashboard side vent (A) by hand from the driver's switch panel or glove box opening to release the hooks (B) on the side vent.
Gently pull out the side vent to remove it.
3. Install the side vent in the reverse order of removal, and push the hooks into place securely.