RDX AWD L4-2.3L Turbo (2010)
Blower Motor: Service and Repair
Blower Unit Removal/Installation
Blower Unit Removal/Installation
1. Remove the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation.
2. Remove the climate control unit See: Control Assembly/Service and Repair/Climate Control Unit Removal/Installation.
3. Remove the harness clip (A), the self-tapping screws, and the passenger's heater duct (B).
4. Remove the harness clip (A), and bolts. Cut the plastic cross brace (B) in the glove box opening with diagonal cutters in the area shown. Retain
these parts to be reinstalled later.
5. Disconnect the connector (A) from the recirculation control motor.
