RDX AWD L4-2.3L Turbo (2010)
10. Install the core in the reverse order of removal and note these items:
-
If you're installing a new evaporator core, add the appropriate amount of refrigerant oil (SP-10) See: Refrigerant Oil/Service and Repair.
-
Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the correct
O-rings for HFC-134a (R-134a) to avoid leakage.
-
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
-
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.
-
Make sure that there is no air leakage.
-
Charge the system See: Service and Repair/A/C System Charging.