RDX AWD L4-2.3L Turbo (2010)
Receiver Dryer: Service and Repair
Receiver/Dryer Desiccant Replacement
NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.
1. Remove the A/C condenser See: Condenser HVAC/Service and Repair.
2. Remove the bolts from the A/C condenser, then remove the receiver/dryer (A), the bracket (B), and the O-rings (C).
3. Install the receiver/dryer in the reverse order of removal. Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (SP-10) before
installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
