RDX AWD L4-2.3L Turbo (2010)
5. With a dry air source, inflate the tire to 300 kPa (3.1 kgf/cm, 44 psi) to seat the tire bead to the rim, then adjust the tire pressure See:
Maintenance/Alignment/Service and Repair, and install the valve stem cap.
NOTE: Make sure the tire bead is seated on both sides of the rim uniformly.
6. Check and adjust the wheel balance, then install the wheels on the vehicle.
7. Lower the vehicle. Torque the wheel nuts to specifications See: Steering and Suspension/Steering/Front Steering Knuckle/Service and Repair.
8. Connect the HDS, and memorize the pressure sensor ID(s) See: Testing and Inspection.
