RDX AWD L4-2.3L Turbo (2010)
License Plate Lamp: Service and Repair
License Plate Light Replacement
1. Remove the rear license trim See: Body and Frame/Exterior Moulding / Trim/License Plate Frame/Service and Repair.
2. Push the license plate light (A) to the side to release the retaining spring, and pull out the license plate light.
3. Disconnect the 2P connector (A) from the license plate light.
4. Release the bulb socket (B) from the lens (C) by pressing on the tabs.
5. Remove the lens from the tailgate by pressing on the tabs.
6. Install the license plate light in the reverse order of removal.
