RDX AWD L4-2.3L Turbo (2010)
7. Install the ATF filler bolt (B) and a new sealing washer (C).
8. Check that the fluid level is between the upper mark and lower mark on the dipstick See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Procedures/ATF Level Check.
9. Install the air cleaner See: Filters/Air Cleaner Housing/Service and Repair.
10. If the maintenance minder required to replace the ATF, reset the maintenance minder See: Service Reminder Indicators/Maintenance Required
Lamp/Indicator/Description and Operation, and this procedure is complete. If the maintenance minder did not require to replace the ATF, go to
step 11 and reset the ATF life with the HDS.
11. Connect the HDS to the DLC (A).
12. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not, go to the DLC circuit troubleshooting See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics/DLC Circuit
Troubleshooting.
13. Select BODY ELECTRICAL with the HDS.
14. Select ADJUSTMENT in the GAUGES MENU with the HDS.
