RDX AWD L4-2.3L Turbo (2010)
Side Curtain Airbag
7. Remove the quarter pillar trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim
Removal/Installation - Pillar Areas
8. Disconnect both SRS wire harness 2P connectors (A) from the side curtain airbags.
Seat Belt Tensioner
9. Remove the front and rear door sill trim See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair.
10. Remove the B-pillar lower trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim
Removal/Installation - Pillar Areas, then disconnect both SRS wire harness 4P connectors (A) from the seat belt tensioners.
Seat Belt Buckle Tensioner
11. Disconnect both SRS wire harness 4P connectors (A) from the seat belt buckle tensioners.
