RDX AWD L4-2.3L Turbo (2010)
40. Check for continuity between body ground and PGM-FI main relay 1 4P connector terminals No. 1 and No. 3 individually.
Is there continuity?
YES -
Replace the under-hood fuse/relay box See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Under-Hood Fuse/Relay Box
Removal/Installation. Also replace the No. 19 FI MAIN(15 A) fuse.
NO -
Go to step 41.
41. While disconnecting each of the parts or connectors below, one at a time, check for continuity between PGM-FI main relay 1 4P connector
terminal No. 2 and body ground.
-
PGM-FI main relay 2 (FUEL PUMP)
-
PCM connector A (44P)
-
Each injector 2P connector
-
Camshaft position (CMP) sensor B 3P connector
-
Crankshaft position (CKP) sensor 3P connector
-
Electronic throttle control system (ETCS) control relay