acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

MICU Input Test|Page 2147 > < Initial Inspection and Diagnostic Overview|Page 2144
Page 1
background image

Information Bus: Component Tests and General Diagnostics
MICU Input Test

MICU Input Test

1. Turn the ignition switch to LOCK (0).

2. Remove the driver's dashboard under cover  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Driver's Dashboard Undercover Removal/Installation.

3. Check the No. 10 (7.5 A) fuse in the under-dash fuse/relay box. If any fuse is blown, replace it and go to step 4.

4. Disconnect under-dash fuse/relay box connectors E, F, G, K, and T.

NOTE: All connector views are shown from wire side of female terminals.

MICU Input Test|Page 2147 > < Initial Inspection and Diagnostic Overview|Page 2144