RDX AWD L4-2.3L Turbo (2010)
Canister Purge Control Valve: Service and Repair
EVAP Canister Purge Valve Replacement
EVAP Canister Purge Valve Replacement
NOTE: DTC P0443 may be stored if the EVAP canister purge valve connector is disconnected within 15 seconds after the ignition switch is turned to
LOCK (0).
1. Remove the air cleaner See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
2. Remove the air bypass outlet pipe See: Fuel Delivery and Air Induction/Turbocharger/Intercooler/Service and Repair.
3. Disconnect the CMP sensor B 3P connector (A).
4. Disconnect the hoses (B), and EVAP canister purge valve 2P connector (C).
5. Remove the screws (D), then remove the EVAP canister purge valve (E).
6. Install the parts in the reverse order of removal.