RDX AWD L4-2.3L Turbo (2010)
Fuel Gauge Sender: Service and Repair
Fuel Pump/Fuel Gauge Sending Unit Replacement
Fuel Pump/Fuel Gauge Sending Unit Replacement
1. Remove the fuel tank unit See: Fuel Pump/Service and Repair/Fuel Tank Unit Removal/Installation.
2. Remove the fuel level sensor (fuel gauge sending unit) (A) from the fuel tank unit (B).
3. Check these items before installing the fuel tank unit:
-
When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place.
-
When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to
bend or twist it excessively.
4. Install the parts in the reverse order of removal.
5. Install the fuel tank unit See: Fuel Pump/Service and Repair/Fuel Tank Unit Removal/Installation.
