RDX AWD L4-2.3L Turbo (2010)
2. Transfer the base gasket (A) from the fuel tank unit to the fuel tank.
3. Align the marks (B) on the fuel tank and the fuel tank unit, then insert it straight into the fuel tank. make sure it evenly contacts the base gasket.
NOTE: To prevent a fuel leak, check the base gasket, visually or by hand, to make sure it is not pinched.
4. Using the tool, tighten a new locknut (A) with a new locknut plate (B) to the specified torque.
NOTE:
-
After tightening, make sure the marks are still aligned.
-
After installation, check the base gasket visually or by hand to be sure it is not pinched.
