RDX AWD L4-2.3L Turbo (2010)
8. Install the parts in the reverse order of removal with a new gasket (F).
NOTE: When torquing the screw of the hose band (G), align the edge of the hose band (H) with the mark (I) painted on the hose band. If you tighten the
screw over the mark, replace the hose band.
9. After installing the throttle body, do this:
-
Refill the radiator with engine coolant See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair.
-
Do the PCM idle learn procedure See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/PCM Idle Learn
Procedure.
