RDX AWD L4-2.3L Turbo (2010)
9. Apply vacuum to the port.
-
If it holds vacuum, replace the turbocharger bypass control solenoid valve See: Service and Repair.
-
If it does not hold vacuum, go to step 10.
10. Turn the ignition switch to ON (II).
11. Select TURBOCHARGER BYPASS CONTROL SOLENOID VALVE ON in the INSPECTION MENU with the HDS.
12. Reapply vacuum to the port.
-
If it holds vacuum, the turbocharger bypass control solenoid valve is OK.
-
If it does not hold vacuum, replace the turbocharger bypass control solenoid valve See: Service and Repair.