RDX AWD L4-2.3L Turbo (2010)
Camshaft Position Sensor: Service and Repair
CMP Pulse Plate A Replacement
CMP Pulse Plate A Replacement
1. Remove the cylinder head cover See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder
Head Cover Removal.
2. Remove the camshaft position (CMP) sensor A See: CMP Sensor A Replacement.
3. Hold the camshaft with an open-end wrench, then loosen the bolt.
4. Remove the CMP pulse plate A.
5. Install the CMP pulse plate A in the reverse order of removal.