RDX AWD L4-2.3L Turbo (2010)
Repair/Cam Chain Installation.
31. Raise the lift to full height.
32. Tighten the lower torque rod mounting bolt See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Chain/Service and
Repair/Cam Chain Installation.
33. Lower the vehicle on the lift.
34. Install the air cleaner housing assembly See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
35. Install the upper torque rod and torque rod stiffener See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Chain/Service and
Repair/Cam Chain Installation.
36. Install the variable valve timing control (VTC) oil control solenoid valve See: Computers and Control Systems/Variable Valve Timing
Actuator/Service and Repair/VTC Oil Control Solenoid Valve Removal/Test/Installation.
37. Install the crankshaft pulley See: Engine, Cooling and Exhaust/Engine/Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service
and Repair.
38. Install the cylinder head cover See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder
Head Cover Installation.
39. Install the drive belt See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
40. Install the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
41. Install the front wheel.
42. Do the CKP pattern clear/CKP learn procedure See: Computers and Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview.