RDX AWD L4-2.3L Turbo (2010)
Electric Load Sensor: Service and Repair
ELD Replacement
1. Remove the under-hood fuse/relay box See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service and Repair/Under-Hood Fuse/Relay
Box Removal/Installation.
2. Remove the screw (A).
3. Turn the housing over, then remove the screw (A).
4. Turn the housing over again. Using two flat-tip screwdrivers, release the tabs (A), and pry up the fuse/relay box base (B) from the fuse/relay box
housing (C).
NOTE: Make sure the terminals (D) are not bent or damaged.