RDX AWD L4-2.3L Turbo (2010)
Is there continuity?
YES -
Repair a short in the wire between the PCM (A22) and the PSP switch.
NO -
Update the PCM if it does not have the latest software See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/PCM
Update, or substitute a known-good PCM See: Computers and Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview, then
recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM See: Computers and Control Systems/Engine Control
Module/Service and Repair.
14. Turn the ignition switch to LOCK (0).
15. Disconnect the PSP switch 2P connector.
16. Connect PSP switch 2P connector terminals No. 1 and No. 2 with a jumper wire, then start the engine.
17. Check the PSP SWITCH in the DATA LIST with the HDS.
Does it change to ON?
YES -
Replace the PSP switch See: Maintenance/Hoses/Power Steering Line/Hose/Service and Repair.
NO -
Go to step 18.