RDX AWD L4-2.3L Turbo (2010)
20. Install new O-rings (E) over the ATF joint pipes.
21. Install A/T clutch pressure control solenoid valve C.
22. Check the connector for rust, dirt, or oil, and clean or repair it necessary, then connect the connector securely.
23. Install the battery base See: Engine, Cooling and Exhaust/Engine/Service and Repair/Engine Installation.
24. Install the air cleaner See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
25. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.