RDX AWD L4-2.3L Turbo (2010)
Shift Interlock Switch: Service and Repair
Park Pin Switch Replacement
1. Remove the shift lever See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and
Replacement/A/T Shift Lever Removal.
2. Move the A/T gear position indicator panel up from the shift lever, and remove the A/T gear position indicator panel light bulb socket (A) from
the indicator panel (B).
3. Remove the park pin switch/A/T gear position indicator panel light connector (C), then remove the connector clamp (D) from the connector.
4. Remove the harness wire ties (E), and remove the park pin switch (F) and A/T gear position indicator panel light bulb socket.
5. Install the park pin switch, and secure the switch with a new screw (G).
6. Install the connector clamp on the park pin switch/A/T gear position indicator panel light connector, and install the connector on the shift lever.
7. Route the park pin switch harness and indicator panel light harness, and secure the harnesses with the harness wire tie (A); tie the indicator panel
light harness at the white tape (B) with the harness wire tie.