RDX AWD L4-2.3L Turbo (2010)
Alarm Module: Service and Repair
Immobilizer-Keyless Control Unit Replacement
NOTE:
-
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the
precautions and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and
Disarming/Service and Repair before doing repairs or servicing.
-
Requires PCM code and all of the client's keys.
1. Remove the steering column covers See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair.
2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
3. Remove the two screws and the immobilizer-keyless control unit.
4. Install the immobilizer-keyless control unit in the reverse order of removal.
5. After replacement, register the immobilizer-keyless control unit See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing
and Inspection/Programming and Relearning, and make sure the immobilizer system works properly.