RDX AWD L4-2.3L Turbo (2010)
Headlamp Igniter Module: Technical Service Bulletins
Lighting - Revised Headlamp Igniter Harness Removal
10-019
July 24, 2010
Applies To:
2007-10 RDX - ALL
Service Manual Update: Removing the Igniter Harness From the Headlight Housing
BACKGROUND
The headlight housing and the igniter harness are available as separate service parts. If you need to replace the headlight housing, follow the REPAIR
PROCEDURE to transfer the igniter harness to the new housing.
TOOL INFORMATION
Special Connector Tool: T/N 07JAZ-002020A
REPAIR PROCEDURE
NOTE:
This procedure is in an outline form that you can also use as a checklist for the repair. If you need more details, bookmark the following procedures
in the 07-10 DX Service Manual, or view them online:
^
Bulb Replacement
^
Headlight Adjustment
1. Remove the screws, the clips, and the bolts securing the front bumper.