RDX AWD L4-2.3L Turbo (2010)
Is there continuity?
YES -
Repair a short in the wire between ignition coil relay 4P socket terminal No. 3 and PCM connector terminal A6.
NO -
Go to step 11.
11. Check for continuity between ignition coil relay 4P socket terminal No. 3 and PCM connector terminal A6.
Is there continuity?
YES -
The system is OK at this time. Check for loose or poor connections at the ignition coil relay and the PCM connector terminal A6. If you have a no-start
condition, update the PCM if it does not have the latest software See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Programming and Relearning/PCM Update, or substitute a known-good PCM See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview.
NO -
Repair an open in the wire between ignition coil relay 4P socket terminal No. 3 and PCM connector terminal A6.