RDX AWD L4-2.3L Turbo (2010)
Seat Occupant Sensor: Service and Repair
Front Passenger's Weight Sensor Replacement
Removal
NOTE:
-
Removal of the front passenger's weight sensors must be done according to Precautions and Procedures See: Air Bag(s) Arming and
Disarming/Service and Repair.
-
The front passenger's weight sensors is part of the seat rail and must be replaced as an assembly.
1. Do the battery terminal disconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures, then wait for 3 minutes
before starting work.
2. Remove the front passenger's seat See: Body and Frame/Seats/Service and Repair/Front Seat Removal/Installation.
3. Remove the seat cushion cover/pad from the seat cushion frame See: Body and Frame/Seats/Seat Cover/Service and Repair/Front Seat Cushion
Cover/Pad Replacement.
4. Remove the TORX nuts (A) attaching the seat track (B) to the weight sensors (C) using a TORX E18 socket.
5. Disconnect the sensor connectors (D) from the front passenger's weight sensor, then remove the front passenger's seat slide assembly (E) including
both front passenger's weight sensors.
Installation
NOTE: Make sure to install the harness wires so they are not pinched or interfering with other parts.
1. Install the new front passenger's seat slide assembly under the seat track.