RDX AWD L4-2.3L Turbo (2010)
2. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
3. Do the ODS unit initialization See: Air Bag Systems/Testing and Inspection/Programming and Relearning.
4. Check the operation of the ODS unit with the HDS See: Air Bag Systems/Testing and Inspection/Component Tests and General Diagnostics/ODS
Unit Operation Check.
5. Confirm proper SRS operation: Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then go
off.
6. Install the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center Console
Removal/Installation.
