RDX AWD L4-2.3L Turbo (2010)
3. Install the front passenger's seat See: Body and Frame/Seats/Service and Repair/Front Seat Removal/Installation
4. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
5. Set the seat-back in the normal position, and make sure there is nothing on the front passenger's seat.
6. Clear any DTCs with the HDS See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
7. Do the ODS unit Initialization See: Air Bag Systems/Testing and Inspection/Programming and Relearning.
8. Confirm proper SRS operation: Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then go
off.
