RDX AWD L4-2.3L Turbo (2010)
Power Seat Switch: Testing and Inspection
Power Lumbar Support Switch Test/Replacement
Power Lumbar Support Switch Test/Replacement
1. Separate the lumbar support switch cover (A) and remove the recline cover (B) See: Body and Frame/Seats/Seat Cover/Service and Repair/Front
Seat Cushion Cover/Pad Replacement.
2. Disconnect the 5P connector (C), and remove the switch (D) from cover.
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, replace the switch.
