RDX AWD L4-2.3L Turbo (2010)
3. Disconnect the wheel speed sensor connector (A).
4. Remove the clips, the bolt, and the wheel speed sensor (B).
5. Install the wheel speed sensor in the reverse order of removal, and note these items:
-
Lubricate the O-ring (C) on the wheel speed sensor.
-
Install the sensor carefully to avoid twisting the wires.
-
If the wheel speed sensor comes in contact with the hub bearing unit. Investigate the cause before replacing the wheel speed sensor.
6. Start the engine, and test-drive the vehicle. Make sure that the ABS and VSA indicators turn off during the test-drive and do not come back on.
