RDX AWD L4-2.3L Turbo (2010)
Yaw Rate Sensor: Service and Repair
Yaw Rate-Lateral Acceleration Sensor Replacement
NOTE:
-
Do not damage or drop the sensor as it is sensitive.
-
Do not use air or electric impact tools.
1. Turn the ignition switch to LOCK (0).
2. Remove the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation.
3. Disconnect the yaw rate-lateral acceleration sensor 4P connector (A).
4. Remove the yaw rate-lateral acceleration sensor mounting bolts (B), then remove the yaw rate-lateral acceleration sensor (C).
5. Check for deformation in the bracket (D). If necessary replace it.
6. Install in the reverse order of removal.
7. Do the yaw rate-lateral/longitudinal acceleration neutral position memorization See: Testing and Inspection.