RDX AWD L4-2.3L Turbo (2010)
9. Remove the locknut (A), and lift up the fuel tank unit (B) from the fuel tank. Then disconnect the transfer tube (C).
Installation
1. Temporarily attach a new base gasket (A) to the fuel tank unit (B), position the mark of the transfer tube (C) up, connect the transfer tube (D), then
insert the fuel tank unit partially into the fuel tank.
NOTE:
-
Be careful not to damage the new base gasket.
-
Be careful not to bend the fuel gauge sending unit.
-
Do not coat the base gasket with oil.
