RDX AWD L4-2.3L Turbo (2010)
2. Connect the driver's seat wire harness 2P connector (C) to the driver's seat position sensor (D).
3. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
4. Clear any DTCs with the HDS See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
5. Check the operation of the driver's seat position sensor with the HDS See: Restraint Systems/Air Bag Systems/Testing and Inspection/Component
Tests and General Diagnostics/Driver's Seat Position Sensor Operation Check.
6. Confirm proper SRS operation: Turn the ignition switch to ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes
off.
7. Reinstall all removed parts.