RDX AWD L4-2.3L Turbo (2010)
Power Window Switch: Service and Repair
Power Window Switch Replacement
Driver's
1. Remove the driver's door panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Panel Removal/Installation.
2. Disconnect the 22P connector (A) from the power window master switch.
3. Remove the harness clips (B) from the driver's door panel.
4. Remove the three screws from the door panel, then pull out the utility pocket (C).
5. Remove the three screws and the power window master switch (A) from the door panel.
6. Remove the four screws from the power window master switch (A).
