RDX AWD L4-2.3L Turbo (2010)
Alternator: Removal and Replacement
Alternator Removal and Installation
Removal
1. Do the battery terminal disconnection procedure See: Battery/Service and Repair/Procedures.
2. Remove the drive belt See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
3. Remove the front bumper See: Body and Frame/Bumper/Front Bumper/Service and Repair.
4. Remove the clip (A), then remove the coolant reservoir (B) from the holder.
5. Remove the support rod clamp bracket (A).