RDX AWD L4-2.3L Turbo (2010)
Ignition Switch: Service and Repair
Ignition Switch Replacement
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and precautions and
procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before
doing repairs or servicing.
1. Do the battery terminal disconnection procedure See: Battery/Service and Repair/Procedures.
2. Remove the steering column covers See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair.
3. Disconnect the 7P connector (A) from the ignition switch (B).
4. Remove the two screws and the ignition switch.
5. Install the parts in the reverse order of removal.
6. Do the battery terminal reconnection procedure See: Battery/Service and Repair/Procedures.
