RDX AWD L4-2.3L Turbo (2010)
Starter Motor: Removal and Replacement
Starter Removal and Installation
Removal
1. Do the battery terminal disconnection procedure See: Battery/Service and Repair/Procedures.
2. Remove the front bumper See: Body and Frame/Bumper/Front Bumper/Service and Repair.
3. Remove the clip (A), then remove the coolant reservoir (B) from the holder.
4. Remove the support rod clamp bracket (A).
5. Disconnect the A/C condenser fan motor connector (A), then remove the A/C condenser fan shroud assembly (B).