RDX AWD L4-2.3L Turbo (2010)
35. Push in the cam ring (A) from the pump housing cap hole (B) with a flat-tip screwdriver to make sure the cam ring is fully seated against the outer
case.
36. Install the pump preload spring (A) in the pump housing.
37. Coat a new 12.7 mm O-ring (B) with power steering fluid, and install it on the pump housing cap (C).
38. Install the pump housing cap on the pump housing, and tighten it to the specified torque.
39. Install the pressure control valve spring (A) in the pump housing.