RDX AWD L4-2.3L Turbo (2010)
Power Steering Pump: Testing and Inspection
Hydraulic Power Steering Pump Pressure Test With T/N 07406-0010001
Hydraulic Power Steering Pump Pressure Test with T/N 07406-0010001
Special Tools Required
-
P/S Joint Adapter Plate (Pump) 07ZAK-S7CA100
-
P/S Joint Adapter (Hose) 07ZAK-S7CA200
-
P/S Pressure Gauge 07406-0010001
-
P/S Joint Adapter (Pump) 07VAK-P8A011A
Check the fluid pressure as follows to determine whether the trouble is in the pump or steering gearbox.
1. Check the power steering fluid level See: Power Steering Fluid/Service and Repair.
2. Disconnect the pump outlet hose (A) from the pump outlet with care so as not to spill the power steering fluid on the frame and other parts, then
install the P/S joint adapter (pump) on the pump outlet (B) with the P/S joint adapter plate.
3. Connect the P/S joint adapter (hose) to the P/S pressure gauge, then connect the pump outlet hose to the P/S joint adapter (hose).
4. Install the P/S pressure gauge to the P/S joint adapter (pump).
5. Fully open the shut-off valve (A).