RDX AWD L4-2.3L Turbo (2010)
5. Install the wheel sensor harness clip (A), the wire guide (B), and the brake hose bracket (C) to the damper (D).
6. Place a floor jack under the lower arm, and raise the suspension by loading it with the vehicle's weight.
7. Tighten the damper pinch bolts and the flange nuts to the specified torque.
8. Tighten the flange nuts on top of the damper to the specified torque.
9. Install the lid to the cowl cover.
10. Clean the mating surface of the brake disc and the inside of the wheel, then install the front wheel.
11. Check the wheel alignment, and adjust it if necessary See: Alignment/Service and Repair.