RDX AWD L4-2.3L Turbo (2010)
2. Install the spring (E) and the lower spring cushion (F). Align the bottom of the spring and the lower spring cushion with lower arm B as shown.
3. Position the floor jack at the connecting point of lower arm B and the knuckle.
4. Slowly raise the floor jack until you align the bolt hole with the holes in lower arm B and the knuckle, then loosely install the new flange bolt (A).
5. Compress the damper by hand until you can align the bolt hole with the holes in lower arm B and the damper, then loosely install the new flange
bolt (C).