RDX AWD L4-2.3L Turbo (2010)
Suspension Strut / Shock Absorber: Removal and Replacement
Front Damper/Spring Removal and Installation
Front Damper/Spring Removal and Installation
Removal
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the front wheel.
3. Remove the wheel sensor harness clip (A), the wire guide (B), and the brake hose bracket (C) from the damper (D). Do not disconnect the wheel
sensor connector.
4. Disconnect the stabilizer link from the damper.
5. Remove the damper pinch bolts (A) and the flange nuts (B) from the damper.
NOTE: Do not allow the knuckle to rotate too far outward. This may allow the driveshaft inboard joint to come apart.
