RDX AWD L4-2.3L Turbo (2010)
9. Measure the A/T clutch pressure control solenoid valve C resistance at the connector terminals.
-
If the resistance is out of standard, replace A/T clutch pressure control solenoid valve C See: Service and Repair/A/T Clutch Pressure Control
Solenoid Valve C Replacement.
-
If the resistance is within the standard, go to step 10.
10. Connect a jumper wire from the negative battery terminal to A/T clutch pressure control solenoid valve C connector terminal No. 2, and connect
another jumper wire from the positive battery terminal to the connector terminal No. 1.
-
If a clicking sound is heard, the valve is OK. Reconnect the connector, and install all removed parts.
-
If no clicking sound is heard, go to step 11.
11. Remove A/T clutch pressure control solenoid valve C.
