RDX AWD L4-2.3L Turbo (2010)
Fluid Line/Hose: Service and Repair
ATF Cooler Hose Replacement
Exploded View
NOTE: When installing the hose clamps, make sure not to interfere with the surrounding parts.
1. Install the ATF cooler hoses over the ATF cooler lines with the clips at the appropriate points in reference to the following list.
2. Secure the ATF cooler hose with the clamp (H) at the white line (I), on the ATF cooler hose.
3. Refill the transmission with ATF to the proper level See: Service and Repair/Procedures/ATF Level Check.